Ease-It Composite Heater - Dental Composite Heater

Ronvig - Ease -It Composite Heater - Dental Composite Heater - Light Heating Unit

Light heating unit
It allows the composite to be transported more easily.

For use with Ease-It Thermo-Block or Ease-It Jar.
Electronic temperature controlled heating unit.

The temperature can be adjusted from 40° to 50°C (104° to 122°F) according to the material chosen and individual preferences.

The built-in LED indicator will turn from yellow to green as soon as the selected temperature is reached.

It has no adverse effect on the composite - see fig. Faculty of Dentistry, Copenhagen University

EASE-IT Jar
Jar for heating composite tips - and for directly placed composite .

The jar has a non-stick coating that facilitates handling of the heated composite. The blue light filtered cover prevents premature curing of the composite material.

It must be placed in the Ease-It Heating unit. Once heated, the jar can be removed from the warming unit and placed at a suitable distance from the chair.

The EASE-IT jar acts as a non-stick mixing pad. For heating small quantities of composite materials and unit dose tips and fiber-reinforced composite materials. The jar makes it easy to mix colors and apply the material in a small layer with a tool.
High viscosity composites can be difficult to extrude from unit dose tips and composite syringes.

EASE-IT solves this problem by heating the composite material to 40 degrees C. This will improve the handling properties of the composite and facilitate shaping in the cavity.
The containers can be removed from the warming unit and placed on the job site. At room temperature, they will maintain the temperature of the composite for at least 10-15 minutes.
As a complete package or alternatively, parts can be ordered separately according to individual needs.

Repeated or even prolonged heating at a given temperature has no adverse effect on the composite material or on the change in degree of transformation.